Description
8mm model energy storage connectors are used for positive and negative high-voltage connections between battery packs for chemical energy storage systems. They can be used for fast, safe, and cost-effective installation of energy storage systems with voltages up to 1,500 V and currents up to 200A.
The main series includes 120A/150A/200A. Available with conductor cross-sections 25 mm², 35 mm², and 50 mm².
Main Parameters
Applicable wire diameter: 25mm² / 35mm² / 50mm²
Rated current: 120A / 150A / 200A
Rated voltage: 1500V
8mm Battery Pole Connector Parameters:
| Model | 8mm | |||
| Conductor cross-section | 25mm² | 35mm² | 50mm² | |
| Electrical Performance |
Rated current | 120A | 150A | 200A |
| Rated voltage | 1500V | |||
| Withstand voltage | 4000V | |||
| Insulation resistance | 5000MΩ | |||
| The above insulation resistance is tested in an environment with a temperature below 40°C and a humidity below 50%RH; When the humidity is above 95%, the insulation resistance is ≥300MΩ. |
||||
| Mechanical Performance |
Mechanical life | 100 times | ||
| Number of contacts | 1 | |||
| Vibration level | QC/T 1067.1-2017 V1 | |||
| Environmental resistance | Protection class | IP67 (optional), IP69K, Sockets are individually sealed(optional) | ||
| Operating temperature | -40℃~125℃ | |||
| Salt spray | Neutral salt spray 48h(unsealed); 480h(sealed) | |||
| Main material | Material (hood/housing) | Nylon (Polyamide- PA) | ||
| Material (seals) | Silicone Rubber | |||
| Material (contacts) | Silver plated red copper | |||
